2.75 acres of medium brush cleared into usable ground.
Brushworks opened a mild-terrain property in Hamilton, Ohio with forestry mulching, turning heavy brush into a cleaner, more maintainable acreage edge.
Every photo here is from this job. Start with the slider above, then follow the work stage by stage.
Before01
Brush was closing off usable ground.
The starting point was a 2.75 acre area of medium brush and woody overgrowth. Access and sightlines were limited, and the land was hard to keep up with in its existing condition.
Dense brush reduced visibility
Walking and mowing access was limited
The area needed a cleaner reset before regular maintenance made sense
After Clearing02
The brush was mulched in place.
Forestry mulching opened the acreage without leaving scattered debris piles. Brush and small woody growth were processed into a mulch layer so the site could be seen, walked, and planned around again.
Material was processed where it stood
The property edge opened up quickly
The finish left the ground ready for the owner’s next step
Maintained03
The value showed up after the initial clearing.
The maintained view is the point of the work: once the heavy growth was knocked back, the property became realistic to manage instead of starting over from scratch each season.
Open ground stayed easier to monitor
Follow-up maintenance became more practical
The area remained usable after the clearing work
Project story
The point was to make the property easier to use and maintain.
Medium brush across 2.75 acres was limiting visibility, access, and long-term maintenance. The owner needed the area opened up without turning the site into a debris pile.
Approach
Mulch the growth where it stood.
Forestry mulching let the crew process brush and small woody growth in place, leaving a natural mulch layer instead of hauling material off site or burning piles.
Outcome
A cleaner property with a maintenance path.
The cleared area became easier to see, walk, mow, and plan around. The maintained view shows the larger value: a property that stays manageable after the initial reset.
Equipment used
Takeuchi TL12 with a Fecon mulching head.
This type of project is handled with a Takeuchi TL12 compact track loader equipped with a Fecon mulching head. That setup is built for dense brush, saplings, invasive growth, and property edges where the goal is to process material in place instead of piling debris across the site.
Tracked equipment for grip and stability on uneven ground
Mulching attachments for reducing brush and woody growth
Cleaner finish that leaves the property easier to maintain
Takeuchi TL12 + Fecon head in action
Fecon head cutting into brushEquipment check before field workDirecting field work
Why it worked
A good clearing job should make the next step easier.
On a property like this, the win is not just the after photo. It is turning rough ground into land the owner can keep up with after the machine leaves.
01
Access improved
Dense areas became easier to see into, walk through, and manage.
02
Debris stayed controlled
Cleared material was handled as part of the process instead of becoming a new cleanup problem.
03
Maintenance became realistic
Once the heavy growth was knocked back, the property could be kept in check instead of starting over from scratch.
BeforeAfter
Maintained
